View source for CentOS 8.x chronyc ntp client configuration

<yambe:breadcrumb self="chronyc ntp client configuration">CentOS 8.x ntp servers|ntp servers</yambe:breadcrumb>
=CentOS 8.x chronyc ntp client configuration=

To setup CentOS 8.x machine to uses chronyc as ntp client use:
# Install chrony
#:<pre>
#:: dnf -y install chrony
#:</pre>
# Configured desired upstream server in /etc/chrony.conf
#:<pre>
#:: server time.google.com
#:</pre>
#: You can leave default pool configuration as it is in the configuration file
# Start and enable chronyd 
#:<pre>
#:: systemctl start chronyd
#:: systemctl enable chronyd
#:</pre> 
#: Note there is no separate service for chronyc client configuration
# Check various chrony parameters such as sources
#:<pre>
#:: chronyc sources
#:: chronyc tracking
#:: chronyc sourcestats
#:: chronyc ntpdata
#:</pre>


Refer:
* https://www.2daygeek.com/configure-ntp-client-using-chrony-in-linux/





<yambe:breadcrumb self="chronyc ntp client configuration">CentOS 8.x ntp servers|ntp servers</yambe:breadcrumb>