Difference between revisions of "Troubleshooting vSAN issues"
From Notes_Wiki
(Created page with "Home > VMWare platform > vMWare VSAN > Troubleshooting vSAN issues =Host cannot communicate with one or more other nodes in the vSAN enabled cluster= There can be possibility of error such as: <pre> Host cannot communicate with one or more other nodes in the vSAN enabled cluster </pre> esp. after some kind of network disconnection OR incorrect shutdown / boot procedure. To solve that: # ping from one host to all other hosts and va...") |
(No difference)
|
Latest revision as of 15:21, 16 May 2022
Home > VMWare platform > vMWare VSAN > Troubleshooting vSAN issues
Host cannot communicate with one or more other nodes in the vSAN enabled cluster
There can be possibility of error such as:
Host cannot communicate with one or more other nodes in the vSAN enabled cluster
esp. after some kind of network disconnection OR incorrect shutdown / boot procedure.
To solve that:
- ping from one host to all other hosts and validate it is working.
- In case of more than one TCP/IP stack such as in case of VxRail use: Test connectivity when using multiple tcp/ip stacks
- Check output of below command to validate whether vSAN is properly enabled on node or not.
- esxcli vsan cluster get
- Put host in maintenance mode at ESXi level and reboot.
- At vCenter level it may not enter successfully
Refer:
Home > VMWare platform > vMWare VSAN > Troubleshooting vSAN issues
