Difference between revisions of "Script for connecting to openVPN and updating nameserver appropriately"
From Notes_Wiki
m |
m |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[Main_Page|Home]] > [[Shell scripting]] > [[Useful bash shell scripts]] > [[Script for connecting to openVPN and updating nameserver appropriately]] | |||
[[Main Page|Home]] > [[CentOS]] > [[CentOS 6.x]] > [[Openvpn server configuration]] > [[Script for connecting to openVPN and updating nameserver appropriately]] | |||
Following script can be used for connecting to openVPN and updating nameserver appropriately: | Following script can be used for connecting to openVPN and updating nameserver appropriately: | ||
Line 36: | Line 36: | ||
[[Main_Page|Home]] > [[Shell scripting]] > [[Useful bash shell scripts]] > [[Script for connecting to openVPN and updating nameserver appropriately]] | |||
[[Main Page|Home]] > [[CentOS]] > [[CentOS 6.x]] > [[Openvpn server configuration]] > [[Script for connecting to openVPN and updating nameserver appropriately]] |
Latest revision as of 10:46, 14 July 2022
Home > Shell scripting > Useful bash shell scripts > Script for connecting to openVPN and updating nameserver appropriately
Home > CentOS > CentOS 6.x > Openvpn server configuration > Script for connecting to openVPN and updating nameserver appropriately
Following script can be used for connecting to openVPN and updating nameserver appropriately:
#!/bin/bash sudo /sbin/service openvpn start echo "Waiting for connection establishment to complete" STATUS=$(ifconfig | grep '10\.7\.1\.1') while [[ "$STATUS" = "" ]]; do echo -n "."; sleep 1 STATUS=$(ifconfig | grep '10\.7\.1\.1') done echo "Connection successful" echo "Going to replace nameserver" sudo mv /etc/resolv.conf /etc/resolv.conf.backup echo "nameserver 10.4.3.222" > /tmp/resolv.conf sudo mv /tmp/resolv.conf /etc/resolv.conf echo "Nameserver replaced" echo "Press enter to disconnect..." read A sudo /sbin/service openvpn stop echo "Going to restore nameserver" sudo mv /etc/resolv.conf.backup /etc/resolv.conf echo "Nameserver restored" exit 0
Note:
- The script assumes that after successful connection client would get IP 10.7.1.1. Replace the "grep '10\.7\.1\.1'" line with appropriate condition such as "ifconfig | grep -A 1 tun0 | grep 'inet addr'" for the case.
- The script assumes nameserver to be configured is 10.4.3.222. This should be replaced with correct nameserver based on situation.
Home > Shell scripting > Useful bash shell scripts > Script for connecting to openVPN and updating nameserver appropriately
Home > CentOS > CentOS 6.x > Openvpn server configuration > Script for connecting to openVPN and updating nameserver appropriately