Difference between revisions of "Installing rsyslog from yum repository"
m |
m |
||
Line 1: | Line 1: | ||
[[Main Page|Home]] > [[CentOS]] > [[CentOS 6.x]] > [[Rsyslog configuration]] > [[Installing rsyslog from yum repository|Installing rsyslog server in CentOS]] | [[Main Page|Home]] > [[CentOS]] > [[CentOS 6.x]] > [[Rsyslog configuration]] > [[Installing rsyslog from yum repository|Installing rsyslog server in CentOS]] | ||
'''There is updated article on this at [[Rocky 9.x Setup rsyslog server for accepting remote device logs]]''' | |||
=Configure rsyslog server= | =Configure rsyslog server= |
Latest revision as of 07:11, 15 June 2023
Home > CentOS > CentOS 6.x > Rsyslog configuration > Installing rsyslog server in CentOS
There is updated article on this at Rocky 9.x Setup rsyslog server for accepting remote device logs
Configure rsyslog server
To install rsyslog use following steps:
- yum -y install rsyslog
- Disable SELinux
- Enable incoming UDP port 514 packets
- Edit '/etc/rsyslog.conf' file as follows:
- Append following lines
- $template TmplAuth, "/var/log/%HOSTNAME%/%PROGRAMNAME%.log"
- authpriv.* ?TmplAuth
- *.info,mail.none,authpriv.none,cron.none ?TmplAuth
- Uncomment following lines:
- $ModLoad imudp
- $UDPServerRun 514
- Append following lines
- service rsyslog start
- chkconfig rsyslog on
Note if for some reason TCP is preferable then uncomment these two lines for enabling TCP based log reception
#$ModLoad imtcp #$InputTCPServerRun 514
Configure rsyslog client
After configuring rsyslog server, configure remote machines to send logs to rsyslog server using:
- Install rsyslog same as in case of server
- Edit '/etc/rsyslog.conf' file and append following configuration:
- *.* @<server>:<port>
- service rsyslog start
- chkconfig rsyslog on
Note if server is configured to use TCP then use:
*.* @@<server>:<port>
to send logs through TCP instead of UDP. Notice two @@ instead of one.
Steps learned from http://tecadmin.net/setup-centralized-logging-server-using-rsyslogd/ and contributed by Kiran Kollipara
Automated rsyslog server and client configuration
For automated rsyslog server and client configuration using ansible use:
--- - name: This playbook configures rsyslog server hosts: rsyslog_server remote_user: root tasks: - name: Install rsyslog package yum: name=rsyslog state=present # environment: proxy_env - name: Copy rsyslog configuration to rsyslog server copy: src=rsyslog_server.conf dest=/etc/rsyslog.conf owner=root group=root mode=644 notify: - restart rsyslog - name: Start rsyslog and enable it on startup service: name=rsyslog state=started enabled=yes handlers: - name: restart rsyslog service: name=rsyslog state=restarted - name: Configure rsyslog client hosts: rsyslog_clients remote_user: root vars: rsyslog_server_ips: - 192.168.122.105 tasks: - name: Install rsyslog package yum: name=rsyslog state=present # environment: proxy_env - name: Copy rsyslog configuration to rsyslog client template: src=rsyslog_client.conf dest=/etc/rsyslog.conf owner=root group=root mode=644 notify: - restart rsyslog - name: Start rsyslog and enable it on startup service: name=rsyslog state=started enabled=yes handlers: - name: restart rsyslog service: name=rsyslog state=restarted
The playbook refers to rsyslog_server.conf which should have:
# rsyslog v5 configuration file # For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html # If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html #### MODULES #### $ModLoad imuxsock # provides support for local system logging (e.g. via logger command) $ModLoad imklog # provides kernel logging support (previously done by rklogd) #$ModLoad immark # provides --MARK-- message capability # Provides UDP syslog reception $ModLoad imudp $UDPServerRun 514 # Provides TCP syslog reception #$ModLoad imtcp #$InputTCPServerRun 514 #### GLOBAL DIRECTIVES #### # Use default timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # File syncing capability is disabled by default. This feature is usually not required, # not useful and an extreme performance hit #$ActionFileEnableSync on # Include all config files in /etc/rsyslog.d/ $IncludeConfig /etc/rsyslog.d/*.conf #### RULES #### # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none -/var/log/messages # The authpriv file has restricted access. authpriv.* -/var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* -/var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit -/var/log/spooler # Save boot messages also to boot.log local7.* -/var/log/boot.log # ### begin forwarding rule ### # The statement between the begin ... end define a SINGLE forwarding # rule. They belong together, do NOT split them. If you create multiple # forwarding rules, duplicate the whole block! # Remote Logging (we use TCP for reliable delivery) # # An on-disk queue is created for this action. If the remote host is # down, messages are spooled to disk and sent when it is up again. #$WorkDirectory /var/lib/rsyslog # where to place spool files #$ActionQueueFileName fwdRule1 # unique name prefix for spool files #$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) #$ActionQueueSaveOnShutdown on # save messages to disk on shutdown #$ActionQueueType LinkedList # run asynchronously #$ActionResumeRetryCount -1 # infinite retries if host is down # remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional #*.* @@remote-host:514 # ### end of the forwarding rule ### $template TmplAuth, "/var/log/%HOSTNAME%/%PROGRAMNAME%.log" authpriv.* ?TmplAuth *.info,mail.none,authpriv.none,cron.none ?TmplAuth
Also the playbook refers to 'rsyslog_client.conf' which should have:
# rsyslog v5 configuration file # For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html # If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html #### MODULES #### $ModLoad imuxsock # provides support for local system logging (e.g. via logger command) $ModLoad imklog # provides kernel logging support (previously done by rklogd) #$ModLoad immark # provides --MARK-- message capability # Provides UDP syslog reception #$ModLoad imudp #$UDPServerRun 514 # Provides TCP syslog reception #$ModLoad imtcp #$InputTCPServerRun 514 #### GLOBAL DIRECTIVES #### # Use default timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # File syncing capability is disabled by default. This feature is usually not required, # not useful and an extreme performance hit #$ActionFileEnableSync on # Include all config files in /etc/rsyslog.d/ $IncludeConfig /etc/rsyslog.d/*.conf #### RULES #### # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none -/var/log/messages # The authpriv file has restricted access. authpriv.* -/var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* -/var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit -/var/log/spooler # Save boot messages also to boot.log local7.* -/var/log/boot.log # ### begin forwarding rule ### # The statement between the begin ... end define a SINGLE forwarding # rule. They belong together, do NOT split them. If you create multiple # forwarding rules, duplicate the whole block! # Remote Logging (we use TCP for reliable delivery) # # An on-disk queue is created for this action. If the remote host is # down, messages are spooled to disk and sent when it is up again. $WorkDirectory /var/lib/rsyslog # where to place spool files #$ActionQueueFileName fwdRule1 # unique name prefix for spool files #$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) #$ActionQueueSaveOnShutdown on # save messages to disk on shutdown #$ActionQueueType LinkedList # run asynchronously #$ActionResumeRetryCount -1 # infinite retries if host is down # remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional #*.* @@remote-host:514 # ### end of the forwarding rule ### {% for rsyslog_server in rsyslog_server_ips %} # start forwarding to {{rsyslog_server}} $ActionQueueType LinkedList # use asynchronous processing $ActionQueueFileName {{rsyslog_server}} # set file name, also enables disk mode $ActionResumeRetryCount -1 # infinite retries on insert failure $ActionQueueSaveOnShutdown on # save in-memory data if rsyslog shuts down *.* @{{rsyslog_server}}:514 # end forwarding to {{rsyslog_server}} {% endfor %}
Home > CentOS > CentOS 6.x > Rsyslog configuration > Installing rsyslog server in CentOS