Difference between revisions of "Configure static routes in debian"
From Notes_Wiki
m |
m |
||
Line 1: | Line 1: | ||
<yambe:breadcrumb>Debian</yambe:breadcrumb> | <yambe:breadcrumb self="Configure static routes in debian">Debian|Debian</yambe:breadcrumb> | ||
=Configure static routes in debian= | =Configure static routes in debian= | ||
Line 45: | Line 45: | ||
<yambe:breadcrumb self="Configure static routes in debian">Debian|Debian</yambe:breadcrumb> | |||
<yambe:breadcrumb>Debian</yambe:breadcrumb> |
Revision as of 04:59, 18 September 2018
<yambe:breadcrumb self="Configure static routes in debian">Debian|Debian</yambe:breadcrumb>
Configure static routes in debian
To configure static routes in debian edit file '/etc/network/interfaces' and use
up route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 down route del -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1
Sample file that uses same technique is:
auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.4.7.2 netmask 255.255.255.0 # gateway 10.4.7.1 up route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.4.7.1 down route del -net 10.0.0.0 netmask 255.0.0.0 gw 10.4.7.1 up route add -net 172.16.0.0 netmask 255.240.0.0 gw 10.4.7.1 down route del -net 172.16.0.0 netmask 255.240.0.0 gw 10.4.7.1 up route add -net 192.168.0.0 netmask 255.255.0.0 gw 10.4.7.1 down route del -net 192.168.0.0 netmask 255.255.0.0 gw 10.4.7.1 auto eth1 iface eth1 inet static address 10.4.8.54 netmask 255.255.255.0 gateway 10.4.8.2
For DHCP based addressing use: 'iface <interface-name> inet dhcp'. For example:
auto eth1 iface eth1 inet dhcp
<yambe:breadcrumb self="Configure static routes in debian">Debian|Debian</yambe:breadcrumb>