Upgrading firwmare on S4100 series Dell switches with OS 10
From Notes_Wiki
Revision as of 07:00, 19 April 2022 by Saurabh (talk | contribs) (Created page with "Home > Switch configuration notes > Upgrading firwmare on S4100 series Dell switches with OS 10 To perform OS10 upgrade using CLI use below steps: # For download the appropriate image for the switch using Dell Digit locker ( https://www.dell.com/SUPPORT/SOFTWARE/ ) # Download OS10 Enterprise Edition image, from the site in tar file format for the upgrade. # Take configuration backup of current running config from exec mode #:<pre> #:: copy running-...")
Home > Switch configuration notes > Upgrading firwmare on S4100 series Dell switches with OS 10
To perform OS10 upgrade using CLI use below steps:
- For download the appropriate image for the switch using Dell Digit locker ( https://www.dell.com/SUPPORT/SOFTWARE/ )
- Download OS10 Enterprise Edition image, from the site in tar file format for the upgrade.
- Take configuration backup of current running config from exec mode
- copy running-configuration startup-configuration
- copy config://startup.xml config://<backup file name>
- Check the ONIE kernel version version in use:
- system "file /mnt/onie-boot/onie/vmlinuz*"
- Only if ONIE kernel version is 4.x.x proceed further with OS 10 upgrade using further steps
- Extract the downloaded tar file in above steps to get binary image
- Download the image (Only downloads, does not installs) to OS 10 switch using:
- image download file-url
- For example scp from a remote Linux machine
- image download scp://userid:passwd@hostip:/filepath
- Check image status
- show image status
- Only if running OS10 release 10.5.0.x or earlier and installing 10.5.2.0 or later now
- image cancel
- Install the 10.5.2.6 or later software image in EXEC mode.
- image install image-url
- For example:
- image install image://filename.bin
- See image status and boot detail
- show image status
- show boot detail
- Reload switch based on previous and new OS versions
- If System is presently running an OS10 release earlier than 10.5.1.0 and you are installing 10.5.1.9 or later
- reload
- System is presently running OS10 release 10.5.1.0 or later and you are installing 10.5.2.6 or later now
- boot system standby
- show boot detail
- reload
- If System is presently running an OS10 release earlier than 10.5.1.0 and you are installing 10.5.1.9 or later
- After reboot check version
- show version
- (Optionally) If you do not want to failback to older version and want both active and standby OS to be of the upgraded version then use:
- show boot detail
- image copy active-to-standby
- show boot detail
Refer:
- https://www.dell.com/support/manuals/en-us/dell-emc-smartfabric-os10/ee-upgrade-downgrade/perform-os10-upgrade?guid=guid-927407cf-d24f-4c35-85ad-eeb7d0729597&lang=en-us
- https://www.dell.com/support/manuals/en-us/dell-emc-smartfabric-os10/ee-upgrade-downgrade/download-os10-image-for-upgrade?guid=guid-fafe5dfa-4822-4ca9-b9e2-7d44631c04cd&lang=en-us
Home > Switch configuration notes > Upgrading firwmare on S4100 series Dell switches with OS 10