Brocade storage switch management IP configuration

From Notes_Wiki
Revision as of 05:56, 19 April 2022 by Saurabh (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Home > Switch configuration notes > Brocade storage switch management IP configuration

To configure management IP to brocade switch use:

  1. Connect to console port using minicom/hyperterminal. Login using admin:password
  2. Check Ip address for interface Management 1/0 and configure ip not present.
  3. Connect laptop/desktop to management port. Configure IP in same subnet. Ping and then SSH to switch. Login using admin:password.

Refer:



Home > Switch configuration notes > Brocade storage switch management IP configuration