Configuring port mirroring or monitor session on Dell OS 10 switches
From Notes_Wiki
Home > Switch configuration notes > Configuring port mirroring or monitor session on Dell OS 10 switches
The steps are exactly same as older article Mirroring ports on Cisco switches
Creating port mirroring
To create port mirroring use following steps:
- Remove configuration from destination port
- config t
- interface <Interface-no>
- no switchport
- no shut
- Create monitor session
- config t
- monitor session 1
- source <Interface> direction both
- destination <Interface>
- no shut
- There are session IDs from 1 to 10+ for multiple monitor sessions.
- Validate session is running as expected
- show monitor session 1
- There are session IDs from 1 to 10+ for multiple monitor sessions.
To remove the created session use:
config t no monitor session 1
If we do not want to remove the configuration but only disable monitoring (port mirroring) temporarily then use:
config t monitor session 1 shut
Refer:
Home > Switch configuration notes > Configuring port mirroring or monitor session on Dell OS 10 switches