Difference between revisions of "Convert ports from network to storage on Cisco UCS unified fabric switch"

From Notes_Wiki
m
m
 
Line 1: Line 1:
<yambe:breadcrumb>Switch_configuration_notes|Switch configuration</yambe:breadcrumb>
[[Main Page|Home]] > [[Switch configuration notes]] > [[Convert ports from network to storage on Cisco UCS unified fabric switch]]
=Convert ports from network to storage on Cisco UCS unified fabric switch=


In Cisco UCS unified fabric switch ports can be converted from 10G network to storage.  This conversion allows ports starting from 1 to be network ports and ports starting from 48, 47, (46, 45, ...) in reverse order (2 ports at a time) to be converted to storage.  To convert more / less ports use following steps:
In Cisco UCS unified fabric switch ports can be converted from 10G network to storage.  This conversion allows ports starting from 1 to be network ports and ports starting from 48, 47, (46, 45, ...) in reverse order (2 ports at a time) to be converted to storage.  To convert more / less ports use following steps:
Line 10: Line 9:
# Drag and slide the slider to convert more/less ports to FC.
# Drag and slide the slider to convert more/less ports to FC.
# Apply and switch will reboot automatically
# Apply and switch will reboot automatically
[[Main Page|Home]] > [[Switch configuration notes]] > [[Convert ports from network to storage on Cisco UCS unified fabric switch]]

Latest revision as of 05:16, 19 April 2022

Home > Switch configuration notes > Convert ports from network to storage on Cisco UCS unified fabric switch

In Cisco UCS unified fabric switch ports can be converted from 10G network to storage. This conversion allows ports starting from 1 to be network ports and ports starting from 48, 47, (46, 45, ...) in reverse order (2 ports at a time) to be converted to storage. To convert more / less ports use following steps:

  1. Open Cisco Unified Computing Storage Manager
  2. Under "Equipment" click on corresponding "Fabric Interconnect"
  3. Choose "Physical Display" tab in the right pane
  4. Right click on the switch and not on empty space and choose "Configure Unified Ports" option
  5. Click "Yes" on warning message. Note that switch will reboot after configuration change.
  6. Drag and slide the slider to convert more/less ports to FC.
  7. Apply and switch will reboot automatically



Home > Switch configuration notes > Convert ports from network to storage on Cisco UCS unified fabric switch

Retrieved from "http://www.sbarjatiya.com/notes_wiki/index.php?title=Convert_ports_from_network_to_storage_on_Cisco_UCS_unified_fabric_switch&oldid=6110"