Lvm2-pvscan service error on Suse LPAR or machine boot
From Notes_Wiki
Revision as of 11:46, 3 August 2022 by Saurabh (talk | contribs) (Created page with "Home > Suse > Lvm2-pvscan service error on Suse LPAR or machine boot If we see following error while booting Suse LPAR or physical machine: <pre> FAILED] Failed to start LVM2 PV scan on device 254:7. See 'systemctl status lvm2-pvscan@254:7.service' for details </pre> Then the issue can be resolved by: # Login into emergency mode by entering root password # Start the lvm2 service manually: #:<pre> #:: systemctl start lvm2-pvscan@254:7.service...")
Home > Suse > Lvm2-pvscan service error on Suse LPAR or machine boot
If we see following error while booting Suse LPAR or physical machine:
FAILED] Failed to start LVM2 PV scan on device 254:7. See 'systemctl status lvm2-pvscan@254:7.service' for details
Then the issue can be resolved by:
- Login into emergency mode by entering root password
- Start the lvm2 service manually:
- systemctl start lvm2-pvscan@254:7.service
- Then resume booting with
- systemctl default
- After this the further reboots of the machine did not require above steps again. In future lvm2-pvscan seemed to start properly.
Home > Suse > Lvm2-pvscan service error on Suse LPAR or machine boot