Windows Server 2016 Setup new Active Directory

From Notes_Wiki
Revision as of 10:57, 15 March 2020 by Saurabh (talk | contribs) (Created page with "<yambe:breadcrumb self="Setup new Active Directory">Windows Server 2016|Windows Server 2016</yambe:breadcrumb> =Windows Server 2016 Setup new Active Directory= To setup AD or...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

<yambe:breadcrumb self="Setup new Active Directory">Windows Server 2016|Windows Server 2016</yambe:breadcrumb>

Windows Server 2016 Setup new Active Directory

To setup AD or deploy AD role / services on an Windows Server 2016 machine use following steps:

  1. Create a new Windows Server 2016 installation as per requirement
  2. Configure static IP on the server (eg 10.1.1.1/24).
  3. If there is no IPv6 connectivity, disable IPv6 on network interface.
  4. Change computer name appropriately (Eg DC) and reboot
  5. If required, enable remote desktop to the server
  6. Go to Server Manager -> Local Server -> Add Roles and Features and add roles for:
    • Active Directory Domain Services
    • DNS Server
    Choose to "Restart destination server automatically, if required"
  7. From Server Manager -> AD DS -> Promote this server to a domain controller
    1. Add a new forest - Enter desired domain name (Eg rndtest.com)
    2. Enter Directory Services Restore Mode password. This must be different than Windows Administrator password.
    3. Create DNS delegation with Administrator user
    4. Choose appropriate Netbios domain name (Eg RNDTEST)
    5. Click "Install"
  8. After installation validate that machine DNS is changed to 127.0.0.1
  9. If updates are required update the system and restart.
  10. In case of VM, shutdown and take snapshot for future purposes


There is older article at Setup a new AD server in Windows Server 2008 Enterprise R2


<yambe:breadcrumb self="Setup new Active Directory">Windows Server 2016|Windows Server 2016</yambe:breadcrumb>