Rocky 9.x Ventoy

Ventoy USB with Secure Boot + TPM - Step by Step

Step 1: Download Ventoy

• Go to the Ventoy official website and download the latest release.

Step 2: Extract and Prepare Ventoy

Run the following commands in terminal:

cd ~
wget https://github.com/ventoy/Ventoy/releases/download/v1.0.99/ventoy-1.0.99-linux.tar.gz
tar -xvf ventoy-1.0.99-linux.tar.gz
cd ventoy-1.0.99

Step 3: Enable Secure Boot + TPM

• Make sure **Secure Boot** and **TPM** are enabled in BIOS/UEFI settings.

Step 4: Install Ventoy with Secure Boot Support

Unmount your USB drive if mounted, then run:

sudo ./Ventoy2Disk.sh -i /dev/sda -s

(Replace /dev/sda with your actual USB device.)

Step 5: Copy ISO Files

• After installation, unplug/replug your USB.
• Copy your **.iso** files into the Ventoy partition.

Step 6: Boot and Enroll Key

• When booting the first time with Secure Boot ON, a blue screen will appear.
• Select:

 * Enroll key from disk → `EFI/ventoy/ventoy.cer` → Confirm → Reboot.

Step 7: Boot ISOs Normally

• Ventoy is now trusted, and you can boot any ISO with Secure Boot + TPM enabled.

Recovery Key (Important)

To view the recovery key after encryption:

sudo snap recovery --show-key

• The recovery key will also be saved in your cloud.
• Important: Keep this key safe for future use.