CentOS 7.x Owncloud installation using bitnami stack
From Notes_Wiki
<yambe:breadcrumb self="Owncloud installation using bitnami stack">CentOS_7.x_owncloud|Owncloud</yambe:breadcrumb>
CentOS 7.x Owncloud installation using bitnami stack
To Install owncloud using bitnami stack use following steps:
- Disable SELinux
- Either allow port 80,443 in firewall or disable firewall
- Ensure that there is no process listening on required ports 80 (httpd), 3306 (mariadb) etc. This is important if you are trying to upgrade from older owncloud to newer owncloud in same machine.
- Download installer from https://bitnami.com/stack/owncloud/installer such as https://bitnami.com/redirect/to/473445/bitnami-owncloud-10.1.0-1-linux-x64-installer.run at time of writing.
- Set execute permissions on downloaded file using command similar to:
- chmod +x bitnami-owncloud-10.1.0-1-linux-x64-installer.run
- Execute installer using command similar to './bitnami-owncloud-10.1.0-1-linux-x64-installer.run' and answer following in graphical or text wizard based on UI:
- Setup folder
- /opt/owncloud-10.1.0-1 (Use default)
- Real name
- admin
- Email ID
- saurabh@sbarjatiya.com
- Login
- admin
- Password and reconfirm password
- secret
- Hostname
- files.sbarjatiya.com (Very important to have proper DNS based FDQN, do not use IP)
- Configure email support
- No
- Settings
- Production (default)
- On deploy owncloud to cloud
- No / Disable
- Launch owncloud application stack
- Yes
- Open https://FQDN/ and login with admin:secret
<yambe:breadcrumb self="Owncloud installation using bitnami stack">CentOS_7.x_owncloud|Owncloud</yambe:breadcrumb>