Difference between revisions of "CentOS 8.x Securing a Linux machine"

From Notes_Wiki
m
m
Line 32: Line 32:




==Setup fail2ban==
==Network firewall managed by someone else OR Microsegmentation==
Any system which is exposed to public Internet starts getting attacks immediately.  If we leave SSH port open then we can see thousands of bad login attempts on any system per day.  To ensure that such attackers get only limited no. of chances (Bad password attempts) to attack system, we can setup fail2ban. Fail2ban will ban IP for some duration (default 900 seconds) if it makes more than a fixed no. of bad login attempts.  The no. of attempts allowed for root user are typically lesser than no. of attempts allowed for other users.  Limiting only a few (9-10) attempts every 900 seconds (15 minutes), is more than enough to ensure that system cannot be exploited using dictionary based attacks / bruteforce attacks.
If it is possible for system to be protected by a network firewall (such as servers in DMZ) or firewall provided by cloud providers (eg Security groups for EC2 VMS in AWS) or NSX firewall in virtualized environments, then such second set of firewall managed by a different team can add considerably to security.   In this case even if the administrator of the system makes wrong modification to default OS firewall, the second firewall can ensure that system is still protected.  Any coordinated change in both host firewall and network firewall should be governed by change management, approvals, ticketing systems, etc. to make the whole process more transparent.  
 
To setup fail2ban refer:
*[[CentOS 7.x fail2ban]]
 
Note that fail2ban supports many other applications such as dovecot, postfix apart from sshd. Hence we should try to secure as many applications via fail2ban as possible.


Earlier versions of OS used to use [[Denyhosts configuration|Denyhosts]], which is now deprecated and we should use fail2ban instead.




Line 105: Line 99:
==Install file integrity monitor==
==Install file integrity monitor==


It makes sense to keep a check on critical system configuration files, libraries and binaries using file integrity monitor.  For this one can use: [[AIDE configuration]] OR [[Tripwire configuration]]
Note that for libraries and binaries installed using package managners (rpm / yum / dnf) we can use:
<pre>
rpm -V --all
</pre>
to check each and every file installed via package manager against the checksum contained in origianl rpm package.  For understanding the output refer [[Advantages of using package managers]]






===Version control===
===Version control===
If you are running custom programs on the server then it is important to have those files versioned.  This will allow checking whether there are any unintended modifications to the sources by any adversary.  This assumes there are remote version control systems on which modification to code branches is protected with appropriate authentication mechanisms.
For version control refer: [[Git]] or [[Bazaar]]




==LDAP instead of local logins when there are many systems (Data-center)==
==LDAP instead of local logins when there are many systems (Data-center)==
It makes sense to have all the login information come from a central system such as LDAP or AD.  Operating system and any applications being used can be integrated with such directory systems for centralized authentication.  This will ensure that all account information is maintained centrally.  If a user leaves we only need to disable / delete their information from the central server.  This will also ensure that UID/GID of users are consistent across all servers.
Refer [[CentOS 8.x 389DS]] or [[LDAP servers]] for information on LDAP


===Strong password policy including aging===
===Strong password policy including aging===
Ideally one should use LDAP for account information and avoid local logins.  However, if local logins are not avoidable then we should configure strong password policy and optional password aging for more security. 
Personally I am not in favor of password aging and forcing users to change passwords frequently.  I have seen users use increasing systematic passwords (Serial 123 or date based) the more often they are asked to change. 
TODO steps on password aging and complexity




==Central logging / remote logging for incident analysis purposes==
==Central logging / remote logging for incident analysis purposes==
If a system is compromised then attacker can delete the logs and traces to make it difficult to understand the entry point.  Hence it can be useful to have a copy of logs being forwarded to another systems in real time.  This way attacker can atmost send more fake logs later on but cannot modify / alter the real logs sent by system, before it was compromised.
For remote logging refer [[Rsyslog configuration]]
==SELinux==
Default Linux security follows Discretionary Access Control (DAC) model.  There are options for using Role-Based Access Control (RBAC) using options such as [[CentOS 7.x SELinux configuration|SELinux]].  These provide a greater degree of security to system ensuring that attacker if they gain access to system via compromised services (eg faulty web site), cannot get root access easily. 
However, it takes considerable expertise to use these systems properly.  Normally if a program / process / command fails to work due to SELinux, we do not see the corresponding reason in the same process log files / commmand output.  We have to remember that it might have been caused by SELinux and manually check SELinux logs / alerts.  Thus, it might make debugging difficult and hence on many systems people disable SELinux immediately after OS installation.


==Avoid Using FTP, Telnet, And Rlogin / Rsh Services==
==Avoid Using FTP, Telnet, And Rlogin / Rsh Services==
  (SSH, SFTP, Owncloud, etc.)
Although obvious, still mentioning for sake of completeness that we should avoid legacy services such as ftp / telnet, rlogin and rsh. Instead of these use:
* SFTP
* [[CentOS 8.x Owncloud|Owncloud]]
* [[OpenSSH server configuration|SSH]]
etc. services for remote logging and file sharing
 
If possible also avoid use of [[CentOS 8.x Cloudstack 4.15 Setup NFS server|NFS]] and use secure file sharing options such as [[CentOS 7.x Samba|Samba]] or [[CentOS 8.x Owncloud|Owncloud]]




==Network firewall managed by someone else OR Microsegmentation==




==Mount filesystems with noexec option==


==SELinux==
It is possible to mount filesystems in /etc/fstab via noexec option.  This ensures that if any file is uploaded on those filesystems, they cannot be executed.  This applies only to binaries that need to be executed directly.  Any scripts such as python, perl, bash or php which are interpreted (executed) via the compilers / interpreters would still get executed.


We should definitely consider doing this on folders which are writable from other machines during to sharing (eg NFS, Samba, Owncloud, etc.)




Line 193: Line 237:
* [[Restricting SSH access to given users]]
* [[Restricting SSH access to given users]]
* https://ostechnix.com/allow-deny-ssh-access-particular-user-group-linux/
* https://ostechnix.com/allow-deny-ssh-access-particular-user-group-linux/




Line 199: Line 244:
If users need abilitty to transfer files via scp/sftp (but not rsync) then they can be restricted to the home folders using sftp chroot.
If users need abilitty to transfer files via scp/sftp (but not rsync) then they can be restricted to the home folders using sftp chroot.
Refer [[Chrooting sftp users to home directory with openSSH]]
Refer [[Chrooting sftp users to home directory with openSSH]]
There is also option of changing user shell to [[Installing and configuring rssh to allow only scp and sftp|rssh]].  This shell will only allow scp and sftp for the given users.




Line 228: Line 277:


Refer [[Passphrase for ssh-keys]]
Refer [[Passphrase for ssh-keys]]
==Setup fail2ban==
Any system which is exposed to public Internet starts getting attacks immediately.  If we leave SSH port open then we can see thousands of bad login attempts on any system per day.  To ensure that such attackers get only limited no. of chances (Bad password attempts) to attack system, we can setup fail2ban.  Fail2ban will ban IP for some duration (default 900 seconds) if it makes more than a fixed no. of bad login attempts.  The no. of attempts allowed for root user are typically lesser than no. of attempts allowed for other users.  Limiting only a few (9-10) attempts every 900 seconds (15 minutes), is more than enough to ensure that system cannot be exploited using dictionary based attacks / bruteforce attacks.
To setup fail2ban refer:
*[[CentOS 7.x fail2ban]]
Note that fail2ban supports many other applications such as dovecot, postfix apart from sshd.  Hence we should try to secure as many applications via fail2ban as possible.
Earlier versions of OS used to use [[Denyhosts configuration|Denyhosts]], which is now deprecated and we should use fail2ban instead.




Line 234: Line 298:
* TODO
* TODO
* OWASP for web applications
* OWASP for web applications




Line 251: Line 317:


; File and folder encryption :: If encryption / protecting entire disk is not possible / practical then there are encrypted filesystems that can be used to encryt data when system is running.  If someone steals hard-disk or boots system using live CD/DVD they cannot get the data unless they know the encryption keys / passwords to decrypt the files.  Refer [[Ecryptfs]] or [[EncFS]]
; File and folder encryption :: If encryption / protecting entire disk is not possible / practical then there are encrypted filesystems that can be used to encryt data when system is running.  If someone steals hard-disk or boots system using live CD/DVD they cannot get the data unless they know the encryption keys / passwords to decrypt the files.  Refer [[Ecryptfs]] or [[EncFS]]




Line 270: Line 337:
** https://docs.google.com/document/d/1P65M9Qmhhrn0sKK3_qKs23WnXKXf_BExgThTH9Uy9Kc/edit#
** https://docs.google.com/document/d/1P65M9Qmhhrn0sKK3_qKs23WnXKXf_BExgThTH9Uy9Kc/edit#
* Honeypots?
* Honeypots?




Line 302: Line 370:
* Try to crack existing passwords
* Try to crack existing passwords
* Look for rootkits using chkrootkit and rkhunter (
* Look for rootkits using chkrootkit and rkhunter (




=Reformat compromised system=
=Reformat compromised system=
Once a Linux system is compromised, it is almost impossible to clean it up with high confidence.  It is always better to take data backup, validate that backup is only data (not executables / scripts, etc.) and setup a fresh system with restore. 








=References=
Refer:
Refer:
* https://www.ubuntupit.com/best-linux-hardening-security-tips-a-comprehensive-checklist/
* https://www.ubuntupit.com/best-linux-hardening-security-tips-a-comprehensive-checklist/

Revision as of 03:43, 26 May 2021

<yambe:breadcrumb self="Securing a Linux machine">Security tips|Security tips</yambe:breadcrumb> <yambe:breadcrumb self="Securing a Linux machine">CentOS 8.x System Administration|System Administration</yambe:breadcrumb>

CentOS 8.x Securing a Linux machine

This article is written assuming CentOS 8.x OS. However the general principles of hardening will apply to any other system. Only the commands need to be changed based on the flavor / distribution of Linux being hardened.

This article is work in progress

Securing a Linux system is a must for any system that is accessible publically or is in potentially hostile environment. General tips for securing a Linux machine have two parts:

  • Initial security hardening of the system
  • Regular tasks to monitor and ensure system is safe


Initial security hardening of system

Update system

It makes sense to keep system fully updated with latest patches and security updates. This is easier for enterprise distributions such as CentOS which are purpose built for servers and hence typically have older version of software compared to Desktop editions (eg Fedora) which might come with latest versions. Using slightly older version of software that has been tested for more than a year is safer for servers.

To update the system fully use:

dnf update -y


Setup firewalld

It is important for system to have host based firewall setup. To setup firewalld Refer:

Basic setup
CentOS 7.x Basic firewalld configuration
Advanced details about firewalld
CentOS 8.x firewalld


Network firewall managed by someone else OR Microsegmentation

If it is possible for system to be protected by a network firewall (such as servers in DMZ) or firewall provided by cloud providers (eg Security groups for EC2 VMS in AWS) or NSX firewall in virtualized environments, then such second set of firewall managed by a different team can add considerably to security. In this case even if the administrator of the system makes wrong modification to default OS firewall, the second firewall can ensure that system is still protected. Any coordinated change in both host firewall and network firewall should be governed by change management, approvals, ticketing systems, etc. to make the whole process more transparent.



Setup logwatch and outgoing alert emails

Any Linux system generates many useful logs that go to various different log files. It is not possible for human administrators to go through many log files of many systems and look for issues and anomalies. Hence, it makes sense to configure Logwatch to go through various log files and send one email per day related to events / logs that were seen on that system in past 24 hours.

Since logwatch can send email enable outgoing email from system using CentOS 8.x postfix send email through relay or smarthost with smtp authentication if required

To install logwatch use:

dnf -y install logwatch

After default setup consider:

Increasing Logwatch detail
Increasing detail of logwatch output
Configure From and To address for logwatch
CentOS 7.x Zimbra command line for sending logwatch email
Disable too much logs from kernel when log detail is high
Disable too much logs from kernel when log Detail is high
Create customer logwatch service or scripts
Creating new logwatch service or scripts



Disable IPv6 connectivity if not required

If you are confident that IPv6 is not being used and not required, then it can be disabled to avoid IPv6 related attacks / entry points using:



Configure backups

It is critical to have backups for all important data from all systems. For automated backups Refer CentOS 7.x rsnapshot or Rsnapshot



Configure longer history retention with date/time

By default only last 1000 commands are stored in history without any timestamps. It makes sense to have system store longer history and along with timestamps.

Refer:


SSL certificate

If server has public FQDN, it makes sense to have recognized SSL Certificates purchased from a provider such as Installing lets-encrypt SSL certificate

Use of recognized SSL certificate in place of self-signed certificates, makes it easy for users to know that they are connecting to the right machine


Containers or virtualization for isolation (lxc, kvm)

If the machine is having multiple functionalities such as DNS, Web server, database etc. then it makes sense to separate them among various containers or virtual machines. This ensures that compromise of one of these systems does not affects others.

To learn about containers refer CentOS 8.x lxc

For virtual machines refer CentOS 8.x KVM

If the base machine is only used for virtualization (and not as Desktop with GUI) and all functionality is served by containers / VMs then it makes sense to have specialized distributions such as Proxmox virtual environment on base machine.


Install file integrity monitor

It makes sense to keep a check on critical system configuration files, libraries and binaries using file integrity monitor. For this one can use: AIDE configuration OR Tripwire configuration

Note that for libraries and binaries installed using package managners (rpm / yum / dnf) we can use:

rpm -V --all

to check each and every file installed via package manager against the checksum contained in origianl rpm package. For understanding the output refer Advantages of using package managers


Version control

If you are running custom programs on the server then it is important to have those files versioned. This will allow checking whether there are any unintended modifications to the sources by any adversary. This assumes there are remote version control systems on which modification to code branches is protected with appropriate authentication mechanisms.

For version control refer: Git or Bazaar



LDAP instead of local logins when there are many systems (Data-center)

It makes sense to have all the login information come from a central system such as LDAP or AD. Operating system and any applications being used can be integrated with such directory systems for centralized authentication. This will ensure that all account information is maintained centrally. If a user leaves we only need to disable / delete their information from the central server. This will also ensure that UID/GID of users are consistent across all servers.

Refer CentOS 8.x 389DS or LDAP servers for information on LDAP


Strong password policy including aging

Ideally one should use LDAP for account information and avoid local logins. However, if local logins are not avoidable then we should configure strong password policy and optional password aging for more security.

Personally I am not in favor of password aging and forcing users to change passwords frequently. I have seen users use increasing systematic passwords (Serial 123 or date based) the more often they are asked to change.


TODO steps on password aging and complexity


Central logging / remote logging for incident analysis purposes

If a system is compromised then attacker can delete the logs and traces to make it difficult to understand the entry point. Hence it can be useful to have a copy of logs being forwarded to another systems in real time. This way attacker can atmost send more fake logs later on but cannot modify / alter the real logs sent by system, before it was compromised.

For remote logging refer Rsyslog configuration



SELinux

Default Linux security follows Discretionary Access Control (DAC) model. There are options for using Role-Based Access Control (RBAC) using options such as SELinux. These provide a greater degree of security to system ensuring that attacker if they gain access to system via compromised services (eg faulty web site), cannot get root access easily.

However, it takes considerable expertise to use these systems properly. Normally if a program / process / command fails to work due to SELinux, we do not see the corresponding reason in the same process log files / commmand output. We have to remember that it might have been caused by SELinux and manually check SELinux logs / alerts. Thus, it might make debugging difficult and hence on many systems people disable SELinux immediately after OS installation.



Avoid Using FTP, Telnet, And Rlogin / Rsh Services

Although obvious, still mentioning for sake of completeness that we should avoid legacy services such as ftp / telnet, rlogin and rsh. Instead of these use:

etc. services for remote logging and file sharing

If possible also avoid use of NFS and use secure file sharing options such as Samba or Owncloud



Mount filesystems with noexec option

It is possible to mount filesystems in /etc/fstab via noexec option. This ensures that if any file is uploaded on those filesystems, they cannot be executed. This applies only to binaries that need to be executed directly. Any scripts such as python, perl, bash or php which are interpreted (executed) via the compilers / interpreters would still get executed.

We should definitely consider doing this on folders which are writable from other machines during to sharing (eg NFS, Samba, Owncloud, etc.)



Secure services

Securing SSH service

Change SSH port from default 22

For this use following steps:

  1. Edit /etc/ssh/sshd_config and use
    Port 22 #Dont remove this yet
    Port 5000
    Replace 5000 with desired port no.
  2. Restart sshd
    systemctl restart sshd
  3. Try to connect to SSH over new port (eg 5000 in above example)
  4. If connection is not working check firewall. By default firewall rules allow only connection to port 22. Enable connections to port 5000 from your IP. Refer CentOS 8.x firewalld
  5. Once connection is wroking edit /etc/ssh/sshd_config and comment port 22:
    #Port 22
    Port 5000
  6. Restart sshd for new settings to take effect
    systemctl restart sshd
  7. Validate that you are able to connect on different port and that connection to port 22 is not working.


Protect SSH port access via firewall

Based on machines which need SSH access to server, protect access to SSH port via firewall.

If SSH port is changed from 22 to some other port, by default firewall will not have exception for that port. In such cases instead of adding exception for port, allow access to all / desired port only from specific IPs / subnets of admin stations. Example

#Allow all ports
firewall-cmd --add-rich-rule 'rule family="ipv4" source address="1.1.1.1/32" accept' --permanent    

#Allow access to port 5000 
firewall-cmd --add-rich-rule 'rule family="ipv4" source address="1.1.1.1/32" port port=5000 accept' --permanent    

#Reload and validate
firewall-cmd --reload
firewall-cmd --zone=public --list-all 

Refer: CentOS 8.x firewalld


Allow SSH only for required users

You can limit users who have SSH access to system using options such as:

Allowusers root

This will allow only root user to login into the system. If you have another user with sudo access and want to disable root access then enable only that user in Allowusers.

First test the setting by connecting in another terminal without closing current root ssh connection. If you are again able to get remote root access directly or via another users, then only close the current connection

Refer:



Restrict users who need file transfer to their home folder using SFTP chroot

If users need abilitty to transfer files via scp/sftp (but not rsync) then they can be restricted to the home folders using sftp chroot. Refer Chrooting sftp users to home directory with openSSH


There is also option of changing user shell to rssh. This shell will only allow scp and sftp for the given users.



Use key based authentication for SSH. At least for root user disable password based SSH

Ideally we should disable password based SSH for all users using:

  1. Edit /etc/ssh/sshd_config and set
    PasswordAuthentication no
  2. Restart sshd service
    systemctl restart sshd

However, if above is not practical then at least disable password based SSH for root user using following in '/etc/ssh/sshd_config':

PermitRootLogin without-password

and reload sshd service

To understand key based authentication Refer Configuring authorized_keys file for public key based access


Secure SSH keys with password

If key based SSH is used, it makes sense to secure SSH keys via password. This way if someone has access to your system temporarily and they copy your ssh private keys, they cannot use them without knowing the password. Most Linux systems allow automatic unlock of ssh identity when doing a GUI login onto system, by saving ssh key password in keyring. Thus, this does not leads to any inconvinience.

Refer Passphrase for ssh-keys



Setup fail2ban

Any system which is exposed to public Internet starts getting attacks immediately. If we leave SSH port open then we can see thousands of bad login attempts on any system per day. To ensure that such attackers get only limited no. of chances (Bad password attempts) to attack system, we can setup fail2ban. Fail2ban will ban IP for some duration (default 900 seconds) if it makes more than a fixed no. of bad login attempts. The no. of attempts allowed for root user are typically lesser than no. of attempts allowed for other users. Limiting only a few (9-10) attempts every 900 seconds (15 minutes), is more than enough to ensure that system cannot be exploited using dictionary based attacks / bruteforce attacks.

To setup fail2ban refer:

Note that fail2ban supports many other applications such as dovecot, postfix apart from sshd. Hence we should try to secure as many applications via fail2ban as possible.

Earlier versions of OS used to use Denyhosts, which is now deprecated and we should use fail2ban instead.



Secure other services eg (Web, proxy, DNS, MySQL etc.) setup on that server.

  • TODO
  • OWASP for web applications



Physical security

It is important to focus on physical security of the system along with software security hardening. Physical security is important because it can prevent accidental /intentional shutdown / reboot / network disconnection. Note following points that explain either potential security issue if someone gets physical access to system or option to secure system from physical access:

BIOS boot passwords
It is possible to configure password in BIOS to be asked during boot. This can be circumvented by doing BIOS reset using jumpers but this requires opening the system and know-how of hardware. This would also take longer compared to booting the system without password by adversary.
Grub single mode root access
It is possible on most systems to edit grub and go to single mode. Then in single mode unrestricted root access is available to copy files / reset root password / change security settings, etc.
Boot from live CD/DVD/USB
A person can boot system from live CD/DVD/USB and mount file-systems. Then settings can be changed, files can be copied, passwords can be reset etc. without leaving any logs on original OS installed on physical hard-drive.
Take hard-disk and put in another system
This has same risks as booting with live CD/DVD/USB. Once the hard-disk is inserted into another system and booted using another hard-drive, the partitions and files of current system can be accessed on remote system without any problem.
BIOS hard-disk encryption
It should be possible to set password on hard-disk on BIOS. This makes hard-disk unusable unless same password is supplied during boot. Even if this hard-disk is taken to another system, the data would remain secured unless the attacker knows the configured hard-disk password.
File and folder encryption
: If encryption / protecting entire disk is not possible / practical then there are encrypted filesystems that can be used to encryt data when system is running. If someone steals hard-disk or boots system using live CD/DVD they cannot get the data unless they know the encryption keys / passwords to decrypt the files. Refer Ecryptfs or EncFS



One time TODO



Regular tasks to monitor and ensure system is safe

TODO

  • Do VA/PT of your system using tools
  • Go through logwatch report (Daily)
  • Additional updates (dnf -y update) -- Automatic updates??
  • Installed packages list (dnf history)
  • List of open ports (ss -alnp). Avoid non-encrpted (non-SSL/non-TLS) services
  • Validate list of users (getent passwd)
    • Validate the UID of Non-Root Users
    • Validate shell of non-human users
  • Validate sudo access
  • Validate SSH authorized keys
  • Validate firewall rules including people who have SSH access
  • Validate cron files and crontab entries
  • Validate atd entries or disable at daemon
  • Validate kernel modules (Honeypots, keyloggers, etc.)
  • Validate backups are happening properly (Including application / DB backups)
    • If possible restore backup (Note steps)
  • Validate fail2ban status and no. of machines blocked
  • Disable unwanted services
  • Disable SUID and SGID Permission
  • Maintain Word-Writable Files
  • Look for files modified using chattr (lsattr)
  • Look at relevant application logs (/var/log/httpd, /var/log/maillog, etc.) and OS logs (/var/log/messages)
  • Look at audit logs
  • Try to crack existing passwords
  • Look for rootkits using chkrootkit and rkhunter (


Reformat compromised system

Once a Linux system is compromised, it is almost impossible to clean it up with high confidence. It is always better to take data backup, validate that backup is only data (not executables / scripts, etc.) and setup a fresh system with restore.



References

Refer:


<yambe:breadcrumb self="Securing a Linux machine">Security tips|Security tips</yambe:breadcrumb> <yambe:breadcrumb self="Securing a Linux machine">CentOS 8.x System Administration|System Administration</yambe:breadcrumb>