Dell 4820T or S3100 hybrid ports

From Notes_Wiki
Revision as of 07:01, 26 September 2019 by Saurabh (talk | contribs) (Created page with "<yambe:breadcrumb>Switch_configuration_notes|Switch configuration</yambe:breadcrumb> =Dell 4820T or S3100 hybrid ports= By default dell switch ports can carry one VLAN untagg...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

<yambe:breadcrumb>Switch_configuration_notes|Switch configuration</yambe:breadcrumb>

Dell 4820T or S3100 hybrid ports

By default dell switch ports can carry one VLAN untagged or multiple VLANs tagged. To have a native VLAN on trunk port (One untagged VLAN while others are tagged on same port), the port settings have to be changed to portmode hybrid using:

  config t
    interface <> 
      no switchport
      portmode hybrid
      switchport

After that in respective VLANs add ports as tagged or untagged based on requirement.

Refer: