Difference between revisions of "Paloalto give static management IP to new firewall"
From Notes_Wiki
(Created page with "Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall After deploying a new virtual or physical palo-alto firewall use following on console to assign management IP: # Login with admin/admin #: Note that it may not work immediately. You may have to wait 5-10 minutes for it to work # During first login firewall will force to change default admin password # Then use below to as...") |
m |
||
| Line 5: | Line 5: | ||
#: Note that it may not work immediately. You may have to wait 5-10 minutes for it to work | #: Note that it may not work immediately. You may have to wait 5-10 minutes for it to work | ||
# During first login firewall will force to change default admin password | # During first login firewall will force to change default admin password | ||
# Then use below to assign static IP | # Then use below to assign static IP <source type="bash"> | ||
configure | configure | ||
set deviceconfig system type static | set deviceconfig system type static | ||
set deviceconfig system ip-address <ip> netmask <netmask> [default-gateway <gateway>] | set deviceconfig system ip-address <ip> netmask <netmask> [default-gateway <gateway>] | ||
commit | commit | ||
</source> | |||
# After this you can access firewall using https://<ip-address> assuming the management port is connected appropriately. | # After this you can access firewall using https://<ip-address> assuming the management port is connected appropriately. | ||
[[Main_Page|Home]] > [[Enterprise security devices or applications]] > [[Paloalto firewall]] > [[Paloalto give static management IP to new firewall]] | [[Main_Page|Home]] > [[Enterprise security devices or applications]] > [[Paloalto firewall]] > [[Paloalto give static management IP to new firewall]] | ||
Latest revision as of 08:13, 15 June 2023
Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall
After deploying a new virtual or physical palo-alto firewall use following on console to assign management IP:
- Login with admin/admin
- Note that it may not work immediately. You may have to wait 5-10 minutes for it to work
- During first login firewall will force to change default admin password
- Then use below to assign static IP
configure set deviceconfig system type static set deviceconfig system ip-address <ip> netmask <netmask> [default-gateway <gateway>] commit
- After this you can access firewall using https://<ip-address> assuming the management port is connected appropriately.
Home > Enterprise security devices or applications > Paloalto firewall > Paloalto give static management IP to new firewall
